With around 250 locations and 90 serve centers, we are represented in the most important economic regions of the world. The advantages are clear: short paths to our customers, fast response times and a shared language.
Especially designed for solids containing and highly viscous media
Springs are protected from the product
Rugged and reliable design
No damage of the shaft by dynamically loaded O-Ring
Universal application
Variants for sterile operation available
Increased axial movement
DiamondFace coating possible
Spring protection and vibration damping
Insensitive to temperature changes
100 % compatible to HJ9... for l1k
Operating range
Shaft diameter: d1 = 18 ... 100 mm (0.71" ... 4")
Pressure: p1*) = vacuum ... 40 bar (vacuum ... 580 PSI)
Temperature: t = -50 °C ... +220 °C (-58 °F ... +430 °F)
Sliding velocity: vg = 20 m/s (66 ft/s)
Axial movement:
d1 = 18 ... 25 mm: ±0,5 mm
d1 = 28 ... 55 mm: ±0,8 mm
d1 = 60 ... 100 mm: ±1,0 mm
* An integral stationary seat lock is not needed within the permissible low pressure range. For prolonged operation under vacuum it is necessary to arrange for quenching on the atmospheric side.
Materials
Seal face: Carbon graphite antimony impregnated (A),
Carbon graphite resin impregnated (B),
Silicon carbide (eSIC-Q7)
Seat G6: Silicon carbide (eSIC-Q7)
Secondary seals: E, EL, V, V16, K, KL, P
Springs: CrNiMo steel (G)
Face housing: CrNiMo steel (G)
Driver: Duplex (G1)
Standards and approvals
EN 12756
WRAS
UBA(KTW)
Recommended applications
eHJ
Water and waste water technology
Drinking water
Chemical industry
Oil and Gas
Petrochemical industry
Refining technology
Pulp and paper industry
Power plant technology
Mining industry
Metal production and processing
Special applications (Cement, ...)
Shipping Industry
eSHJ
Food and beverage industry
Pharmaceutical industry
Notes
Variant for sterile applications available. Please inquire.
Product variants
eSHJ
Variant for sterile applications.
Please inquire.